Basic Info.
Application
Industrial, Household Appliances
Operating Speed
Adjust Speed
Casing Protection
Protection Type
Structure and Working Principle
Brushless
Certification
ISO9001, CCC
Bracket Bottom Length
68mm
Transport Package
Cartons
Product Description
48V 750W Bafang Mid Drive Motor
With an integrated speed sensor, this mid-drive motor, which is compatible with standard bikes, has a rated power of 750W, a reduction ratio of 1: 21.9 and a maximum torque of 80 N.m, providing ideal power for vehicles. Light but strong and efficient, this motor greatly enhances riding comfort and is suitable for touring bikes and commuter bikes. Feature:
Upgrade:Upgraded IRFB3077 mosfets controller.
Four riding modes:Pure electric mode & human riding model & power assistance & push model. 4 working modes can be switched at will.
Easy Installation:Can be successfully installed into an electric bicycle in just a few time by only a few tools which can remove the crankset and the center shaft, as well as tools for installing this mid-drive motor.
Universal Compatible:It's compatiable with mountain bike,road bike, racing bike ect bikes with 68-73mm bottom bracket
Motor Specification:
Bafang Model:G340.750
Power:750W
Voltage:48V
Controller Current: 25A
No Load Speed(RPM) :140-160
Load Speed(RPM):120-135
MAX Torque:100 N.m
Max speed:50-55km/h
Efficiency: > 85%
PAS SENSOR : Speed Sensor
Reduction Ratio: 1 : 21.9
Certification:CE/EN 14764/ROHS
Waterproof Grade:IP65
Net Motor Weight: 4.24kg
Motor kits Weight:5.6-6.0kg
Bracket bottom length:68mm
Motor Operation Temperature:-20ºC-45ºC
48V 15Ah Rear Luggage Specification:
Normal Voltage: 48V
Rated Capacity:15AH
Battery Cell:Built in 2500mah
Array mode:13s6p
Battery size: 450*160mm
Battery Weight:6KG
Max Constant Discharge Current:25A
Peak current:60A
Charge voltage:54.6V
Discharge cut off voltage:36.4V
Way of Charge:CC/CV
Cycle Life:1000 times
Charge Temperature:-15-65ºC
Discharge Temperature:-15-65ºC
Protection Function:Over charge, Over discharge,Over current, Short circuit, Balance
FAQ:
Q: How do I know if this mid drive motor fits for my bike?
A: This mid drive motor fits for the bike with 68mm (2.68inch) - 73mm (2.87inch) wide bottom bracket. The inner diamater of the bracket should be not less than 33.5mm. We'll send extra install accessoreis for 73mm bottom bracket.
Q: How do I confirm whether I need the brake levers or the brake sensors?
A: If your brakes are hydraulic or you want to use your own brake sensors, you can choose brake sensors. They can connect with your brakes to work directly.
Q: Can I install the motor as soon as I receive it?
A: Before installing the motor, please follow the steps in the manual to connect the motor to see if the motor can work normally. If there is a problem, please contact us first, we will provide technical support, don't worry.
Packaging included:
1 * 48V 350W Mid Drive Motor
1 Pair * Brake Lever or Brake Sensor
1 Pair * Crank
1 Pair * Chainwheel(44T/46T/48T/52T option, please kindly leave us message if you want to change chainwheel)
1 Set * Thumb Throttle
1 Set * Speed Sensor
1 * Display ( 750C bluetooth, DPC18, KD986, 860C, P850C, 850C, 750C, SW102, 500C, C965, C961 option)
1 * 4 in 1 Cable
1 * Accessories1 * 48V 20Ah battery with trunk
1 * Battery charger (US/EU/AU/UK Option)
Warm Tips:
1, Due to the particularity of the battery, some motors and batteries are not in the same warehouse, so you may receive more than one package. If there are not all products in the package you received, please do not open dispute or bad reviews first, please contact us for confirmation.
2. When using the motor kit, please make sure that the battery key is locked, otherwise the discharge port is easily burned out.
Address:
No. 6 Floor, Xirendang Industrial Zone, Liushi, Yueqing, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, HSE, QC 080000
Company Introduction:
Our company supplies different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
){kind=link}